Zone Offroad ZOND38F/D38N 6" Lift Kit

Important Notes

• Will work with Power Wagon models with the addition of sway bar link kit D5301.
• Power Wagon models came factory with a 2" taller ride height, so net lift gain will be 4" over stock.
• This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
• Although rare, if you experience front drive-line vibration, install the optional transfer case indexing ring.
• This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
• Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
• Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper's stock location.
• Works on 2013 2500 with 4 link front suspension only.
• Will not fit 1 Ton Trucks.
• ATTN State of California Consumers warning: Cancer and Reproductive Harm