Valid Till:
Fitment
| Years | Make | Model | Drive | Engine |
|---|---|---|---|---|
| 2025 | Dodge/Ram | 1500 | 4WD | Diesel |
| 2025 | Dodge/Ram | 1500 | 4WD | Gas |
Features
- Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance
- Heavy-duty differential skid plate improves off-road protection
- High-strength, CNC machined, replacement steering knuckles improve strength while correcting steering angles
- Top mount strut and preload spacers set ride height and maintain ride quality
- Rear coil springs achieve leveled stance while maintaining ride quality and load capacity
Quick Specs
- Front Lift Method: Cross Member & Strut Spacer
- Front Lift Height: 6"
- Rear Lift Method: Coil Spring
- Rear Lift Height: 5"
- Shocks Included: Yes
- Lift Height: 6-7.5"
- Est. Install Time: 8 hrs
- Difficulty Level: Moderate
- Tools Needed: Strut Compressor
- 37 x 12.5 with 20 x 9 and 5 in. Backspace
- 37 x 12.5 with 18 x 9 and 4.5 in. Backspace
Trimming may be required
- Part Number : ZOND149F/D149N
Important Notes
- Fits models with 3.0L Hurricane I6 and 3.6L V6 engines
- Will NOT fit 2019–2025 RAM 1500 Classic models. Refer to the 2018 kit listings
- Will NOT fit models equipped with the Thermal Axle option (Reference build code DSK-P)
- Vehicles equipped with the Off-Road Group option require special steps similar to Ram 1500 Rebel. To verify if your truck is equipped, contact your local Ram dealer with your VIN and ask for a window sticker lookup. Look for “Off-Road Group” in the “Optional Equipment” section
- RAMs with factory 22" wheels require the larger bore knuckles due to a larger wheel bearing assembly (Reference build code WPM or WPZ)
- Stock 18" wheels cannot be reinstalled due to steering interference
- Stock 20" and 22" wheels can be reinstalled with factory tire size
- This kit will NOT work on Diesel models
- Does NOT work for models with factory airbag suspension
- When installing the 6" kit on a Rebel or truck with Off-Road Group:
- With preload spacer: truck will sit roughly 1/2" front high
- Without preload spacer: truck will sit about 3/8" nose low
- Disconnect BOTH Main and Auxiliary batteries (if equipped) before performing install. More details in the instructions
- Bumper Spacer Kit (ZOND5802) is recommended for additional tire-to-fender clearance. Sold separately
- IF USING 18" AFTERMARKET WHEELS WITH 4.5" BACKSPACING, TEST FIT WHEELS ON VEHICLE BEFORE MOUNTING TIRES TO ENSURE CLEARANCE
- ATTN State of California Consumers: Warning: Cancer and Reproductive Harm
Zone Offroad ZOND149F/D149N 6" Lift Kit
2025 Dodge/Ram 1500 4WD Diesel/Gas
2025 Dodge/Ram 1500 4WD Diesel/Gas
- SKU :
- Part Number :
20% off
Cyber Week Sale! (No coupon code discount allowed)
As low as
$1,306.84
Regular Price
$1,633.55
As low as
$1,306.84
Regular Price
$1,633.55
