Valid Till:
Fitment
| Years | Make | Model |
|---|---|---|
| 2018-2025 | Jeep | Wrangler JL |
Features
JL Wrangler/Unlimited:
- Lift Height: 0–5”
- WMS-WMS: 66.5”
- Axle Tube: 3.25” x 0.5”
- Locker: NA
- Axle Shafts: 27-Spline
- Wheel Bolt Pattern: 5x5”
- Gear Ratio: NA
- Eliminates center axle disconnect
- Compatible with Dana 30 AdvanTEK (M186) internal components
- CALL CUSTOMER SERVICE FOR OPTIONS
Tera30 HD Front Axle:
- 3.25” O.D. x 0.5” wall extreme duty axle tube increases torsional strength to resist bending (JL)
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles w/ greater upper and lower section strength
- Ductile cast iron housing w/ increased rib gussets
- HD ductile iron differential cover w/ increased cover mounting area
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- UV protected triple-stage powder coat for corrosion resistance
- 1/4”-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle and raised track bar bracket for lifted applications
- Pre-drilled holes on spring perches for bump stop extension bolts
- Retains all factory ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA w/ new components
- 1-Year/Unlimited Mileage Warranty
Quick Specs
- 8 Hours (No R& P) / 6 Hours (Geared) install time
- Lift Height: 0–5”
- WMS-WMS: 66.5”
- Axle Tube: 3.25” x 0.5”
- Locker: NA
- Axle Shafts: 27-Spline
- Wheel Bolt Pattern: 5x5”
- Gear Ratio: NA
- Eliminates center axle disconnect
- Compatible with Dana 30 AdvanTEK (M186) internal components
- Part Number : 3630100/3630410
Important Notes
- Does NOT work w/ Front Axle Disconnect.
- Factory Front Inner Right Axle Shaft – does NOT work w/ Tera30 HD Front Axle Housing.
- Tera30 HD Front Inner Right Axle Shaft will work w/ factory Dana 30 AdvanTEK (M186) Front Axle.
Requirements & Recommendations:
- CALL CUSTOMER SERVICE FOR OPTIONS
- Long Control Arm & Bracket Kit – 8-Arm (Alpine IR: JL2: # 1310512 or JL4: # 1310510) (Alpine: JL2: # 1316012 or JL4: # 1316010)
- Short Control Arm Kit – 8-Arm (Alpine IR: # 1416510 or Alpine: # 1416610)
- Sport Frame Bracket Kit – Front Control Arm (# 1938125)
- Sport Control Arm Kit – Front Lower (# 1253000)
- HD Forged Adjustable Track Bar (Front: # 1753420 and/or Rear: # 1754420)
- HD Forged Drag Link Kit & HD Chromoly Tie Rod Kit (# 1863900)
- HD Forged Drag Link Kit (# 1863920)
- HD Chromoly Tie Rod Kit (# 1863910)
- Delta Brake System – 5x5” (Front & Rear: # 4403450 or Front: # 4403451)
TeraFlex 3630100/3630410 Tera30 HD Front Axle Housing - (0-5” Lift)
2018-2025 Jeep Wrangler JL
2018-2025 Jeep Wrangler JL
- SKU :
- Part Number :
As low as
$3,739.99
As low as
$3,739.99
