Valid Till:
Fitment
| Years | Make | Model |
|---|---|---|
| 2020-2025 | Jeep | Gladiator JT |
Features
Falcon Coilover Jeep shocks
- 13” stroke, Front/Rear with 16” Rear JT wheel Travel
- Adjustable crossover for True Dual-Rate
- 4.5” lift, +/- 1.25” adjustability using quick adjust snap rings
- 23” articulated suspension movement, no limit straps required to protect the shocks
- Coated, Booted and Sealed, oversized Gimbal Lock Bearings mount and maintain shock orientation
- JT specific springs, and shock tuning
- Falcon 3.3 series Quick Adjust tuning
- Designed for standard 3.0” coils
- Refreshed Speed Bumps silently provide 4X the bottoming resistance
- 1-year warranty
TeraFlex Coilover RT Suspension
- RT4 Long Arm Suspension for control, Flex, and stability
- Bolt on ¼” laser cut reinforced Coilover brackets
- Adjustable Alpine IR Long Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angles and tune anti-squat geometry for proper suspension alignment on 3–6” lift kits
- Constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
- Bolt-on Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme Coilover Shock droop as well as shock load transferred through the Long Control Arms
- Brackets are gusseted and reinforced for superior strength w/ reduced NVH compared to other long arm kits
- Brackets feature a premium triple-stage powder coating that provides superior durability and corrosion resistance
- Long Arm Suspension Crossmember and RockGuard Transmission Skid Plate / Long Arm Crossmember Reinforcement provide additional strength
- HD Forged Adjustable Track Bars and Track Bar Bracket(s) improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
- Features Front Sway Bar Quick Disconnects
- Full range of movement for off-road flex and articulation
- Install and drive simple bolt-on installation — no frame welding required
- TeraFlex Limited Lifetime Warranty against defects
- Patented design
Quick Specs
- 30 Hours install time
- Part Number : 2052010/2052020
Important Notes
- REQUIRES wheels w/ 4.75” backspacing or less – or 1.75” Wheel Offset Adapter Pair (# 1057000 x 2) for stock wheels – NOT INCLUDED.
- Requires Front driveline “double cardon” upgrade due to increased travel
- Models with plastic bumpers REQUIRE removal of bumper-to-fender wind deflector/splash guards
- REQUIRES cutting/removal of factory control arm bracketry and spring buckets to install
- Optimized rear tune for the complexities of a 40” bed mounted spare tire
- HD Axle lower control arm relocation brackets require welding
- Alignment REQUIRED
TeraFlex 2052010/2052020 Alpine RT Coilover Suspension System
2020-2025 Jeep Gladiator JT
2020-2025 Jeep Gladiator JT
- SKU :
- Part Number :
As low as
$11,599.99
As low as
$11,599.99
