Valid Till:
Fitment
| Years | Make | Model | Drive |
|---|---|---|---|
| 2020-2025 | Jeep | Gladiator JT | 4WD |
Features
Alpine CT3:
- Lift Height: 3.5”
- Sport/Overland Fenders: 33–35” Tires
- Rubicon/Mojave Fenders: 35–37” Tires
CT Long Arm Extended-Travel:
- Adjustable Alpine Long Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angles and tune anti-squat geometry for proper suspension alignment on 3–6” lift kits
- Constructed from durable 42mm x 4mm or 50mm x 5mm wall DOM tube for maximum strength
- On higher lifts, bolt-on Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Long Control Arms
- Brackets are gusseted and reinforced for superior strength w/ reduced NVH
- Brackets feature a triple-stage powder coating that provides superior durability and corrosion resistance
- Long Arm Suspension Crossmember provides additional strength
- Driveshaft Lowering Spacers, Forged ST Sway Bar, and Extended-Travel Accessory Kit safely provide 16” of rear suspension travel
- Rear Coil Spring Retainers prevent the springs from unseating during full suspension travel
Cross-Trail:
- Delivers true Cross-Trail (CT) performance
- Dependable performance w/ zero worries
- Positive, responsive handling w/ reduced NVH
- High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality
- Front HD Forged Adjustable Track Bar and Track Bar Brackets improves steering response, centers axle to optimize vehicle roll center, and reduces body roll for unsurpassed handling
- Front and Rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
- Features Front Sway Bar Quick Disconnects
- Full range of movement for off-road flex and articulation
- TeraFlex Limited Lifetime Warranty against defects
Quick Specs
- 25 Hours install time
- Lift Height: 3.5”
Max Tire Diameter:
Sport/Overland Fenders:
- 33” (w/ 2” front and 1” rear bump stops/strike pad extensions/shims)
- 35” (w/ 3” front and 2.5” rear bump stops/strike pad extensions/shims)
Rubicon/Mojave Fenders:
- 35” (w/ 2” front and 1” rear bump stops/strike pad extensions/shims)
- 37” (w/ 2” front and 2.5” rear bump stops/strike pad extensions/shims)
- Part Number : 2023100/2023120
Important Notes
- REQUIRES aftermarket wheels w/ 4.75” backspacing or less – or 1.75” Wheel Offset Adapter Pairs (# 1057000 x 2) for stock wheels – NOT INCLUDED.
- Models with plastic bumpers REQUIRE removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires.
- Sport/Overland fenders and Rubicon/Mojave fenders REQUIRE 2” Front and 1” Rear Bump Stop/Strike Pad Extensions/Shims (INCLUDED) to fit 33” tires and 35” tires, respectively.
- Sport/Overland fenders REQUIRE 3” Front and 2.5” Rear Bump Stop/Strike Pad Extensions/Shims (INCLUDED) to fit 35” tires.
- Rubicon/Mojave fenders REQUIRE 2” Front and 2.5” Rear Bump Stop/Strike Pad Extensions/Shims (INCLUDED) to fit 37” tires.
- REQUIRES cutting/removal of factory control arm bracketry to install Long Arm Brackets.
- Alignment REQUIRED.
- REQUIRES longer shocks (NOT INCLUDED) – Falcon Performance Shocks recommended.
TeraFlex 2023100/2023120 3.5” Alpine CT3 Long Arm Extended-Travel Suspension System – No Shocks
2020-2025 Jeep Gladiator JT 4WD
2020-2025 Jeep Gladiator JT 4WD
- SKU :
- Part Number :
As low as
$6,123.86
As low as
$6,123.86
