
Fitment
| Years | Make | Model |
|---|---|---|
| 2020-2025 | Jeep | Gladiator JT |
Features
Sport ST3:
- Lift Height: 3.5”
- Sport/Overland Fenders: 35” Tires
- Rubicon Fenders: 37” Tires
ST Extended-Travel Suspension Systems:
- Front Sport Frame Brackets balance front caster and pinion angles on 2.5–4.5” lift kits
- Bolt-on Sport Frame Brackets install between factory frame mounts and stock front upper and front lower control arms
- Rear Extended-Travel Axle Brackets, Rear Driveline Lowering Spacers, Rear Forged ST Sway Bar, and Extended-Travel Shock Accessory Kit safely provide 16” of rear suspension travel
- Bolt-on Extended-Travel Axle Brackets install between factory axle mounts and rear upper control arms
- Front and Rear Track Bar Axle Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
- Rear Coil Spring Retainers prevent the springs from unseating during full suspension travel
Street & Trail:
- Delivers true Street & Trail (ST) performance
- Dependable performance w/ zero worries
- Positive, responsive handling w/ reduced NVH
- Front and Rear Progressive Bump Stops protect occupants and the vehicle from hard suspension bottoming
- Features Front Sway Bar Quick Disconnects
- Full range of movement for off-road flex and articulation
- Install and drive, simple bolt-on installation – no welding required
- TeraFlex Limited Lifetime Warranty against defects
Quick Specs
- 9.5 Hours (10.5 Hours w/ shocks) install time
- Lift Height: 3.5”
Max Tire Diameter:
- Sport/Overland Fenders: 35” (w/ 3” front & 2.5” rear bump stops)
- Rubicon Fenders: 37” (w/ 2” front & 2.5” rear bump stops)
- Part Number : 2013000/2013020
Important Notes
- Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (#1057000) for stock wheels – NOT INCLUDED.
- Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires.
- Sport/Overland fenders require 3” Front and 2.5” Rear Bump Stop/Strike Pad Extensions/Shims to fit 35” tires — INCLUDED.
- Rubicon fenders require 2” Front and 2.5” Rear Bump Stop/Strike Pad Extensions/Shims to fit 37” tires — INCLUDED.
- Alignment required.
- Sport Frame Bracket HD Reinforcement Kit (#1938115) beefs up the Front Control Arm Sport Frame Brackets. Recommended, but not required.
- Requires longer shocks (NOT INCLUDED) – Falcon Performance Shocks recommended.
TeraFlex 2013000/2013020 3.5” Sport ST3 Extended-Travel Suspension System - No Shocks
2020-2025 Jeep Gladiator JT
2020-2025 Jeep Gladiator JT
- SKU :
- Part Number :
As low as
$2,676.91
As low as
$2,676.91



