Skip to the beginning of the images gallery

Fitment

Years	Make	Model
1979-1993	Ford	Mustang

Features

Replaces OE MacPherson suspension with superior double-wishbone design for improved handling and geometry
Incorporates an upper control arm to induce much needed negative camber gain.
Caster, roll center, bumpsteer and Ackerman angles are optimized.
Bolt-in frame surrounds create attachment points for the upper control arms and the shocks, this keeps the load on the frame rails for maximum strength and reduced NVH.
Upper and lower arms feature Delrin bushings infused with Teflon to minimize stiction and eliminate the need for lubrication.
Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance.
Lower control arm design improves tire clearance and steering angle, 30 degree’s with up to a 275mm wide tire.

Quick Specs

Negative Camber Gain – 1.25 deg./in.
Positive Caster – 7-9 deg.
Bump steer – under .050″
Lowers ride height 2″
50lbs lighter than stock suspension
Stock track width

Part Number : 12122600

Important Notes

Fit’s Stock K-Member (except 84-86 SVO)
Works with all subframe connectors.
Uses S550/S650 (15-24) or SN95 (94-04) Mustang brake systems. (Caliper brackets sold separately.)
17″ minimum wheel diameter.
Compatible with stock and most aftermarket sway bars including Ridetech adjustable rate front sway bar Part # 12129100
Perfect pairing with our Ridetech Rear IRS Conversion (replaces live rear axle)
California Warning: Cancer And Reproductive Harm - Www.P65Warnings.Ca.Gov

Ridetech 12122600 Front SLA Suspension System

1979-1993 Ford Mustang

4.9256198347107 847 5

98.512396694215%

4.9/5 out of 847 Company Reviews. Rating:

Add Your Review

1979-1993 Ford Mustang

Brand : Ridetech
SKU : RID-12122600
Part Number : 12122600

$3,300.00

Your discount may still be available. Contact us in Live Chat

Lowest Prices
Price match guarantee
In-House Experts
We know our products
Factory Authorized
Install Center
Guaranteed Fitment
Always the correct part
International Shipping?
Get a Quote

Talk to a Specialist Now

Click here for live chat

Product Details

This bolt-in SLA (Short-Long-Arm) suspension system replaces the stock MacPherson strut design with a billet aluminum upper control arm, tubular lower arm and spindles with S550/S650 Mustang hubs. The factory strut design offers very little camber gain and poor overall geometry.

This design greatly improves negative camber gain, which positions the tire perpendicular to the pavement through the corners without the need for excessive static camber and overly stiff spring rates. Caster, roll center and Ackerman angles were also optimized. Compatible with either Ridetech Coil-overs or Shockwave air suspension (sold separately).