Important Notes

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
• Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5 Backspace / 6mm Offset
• Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25 Backspace / 6mm Offset
• Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25 Backspace / 6mm Offset
• APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
• APPLICATION NOTE #88: Removal of the coil centering cup in factory coil bucket required for installation
• APPLICATION NOTE #115: Lift heights based on 4WD crew cab diesel
• APPLICATION NOTE #120: Secondary shock options available, contact ICON for more details
• APPLICATION NOTE #151: Fits single rear wheel models only
• APPLICATION NOTE #163: If equipped with OnBoard Scales also requires sensor bracket part number 66204
• TECH NOTE: Super Duty diesel models without Tremor package will have front lift height range of 4-5.5" over stock
• TECH NOTE: Super Duty diesel models equipped with Tremor package will have front lift height range of 3-4.5" over stock
• TECH NOTE: Super Duty gas models without Tremor package will have front lift height range of 4.5-6" over stock
• TECH NOTE: Super Duty gas models equipped with Tremor package will have front lift height range of 3.5-5" over stock
• TECH NOTE: Will not fit F-350 Cab & Chassis models
• TECH NOTE: If installing with ICON 2.5 Series remote reservoir secondary shocks, reservoir doubler kit part number 611003 is also required
• TECH NOTE: Due to tight clearances and varying placement of vehicles wiring harness in the upper front-passenger wheel well area, installer must ensure adequate clearance between the harness, coilover reservoir, and other components to prevent chafing/damage to wire harness. If adequate clearance cannot be achieved, please contact ICON Customer Service.