BDS Suspension 561FS/561H 6" Lift Kit 4-Link with with FOX 2.0 or Nitro Shocks

Search

Select Your Vehicle

Toggle Nav

Fitment

Years	Make	Model	Drive	Engine
2008-2010	Ford	F-250 Super Duty	4WD	Diesel
2008-2010	Ford	F-350 Super Duty	4WD	Diesel

Easy, 100% Bolt-on installation
Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
Fabricated steel blocks provide level stance from front to rear
Standard NX2 Nitro shocks with vehicle-specific valving for better control
Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Removal of the factory block is required.
Installation of the rear block kit will result in a "pre-runner" look with the rear of the vehicle 2" lower than the front. To get a level stance you must upgrade to the rear leaf spring option.
These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.
Although extremely rare, front driveline vibration may occur.
Front exhaust modification may be required to clear the front driveshaft on gas models.
U-bolts will not fit dually models.
Dropped pitman arm will not fit 10 lug wide track F350 models.
37 x 12.5 with 17 x 9 and 4.5 in. Backspace
37 x 12.5 with 18 x 9 and 4.5 in. Backspace
37 x 12.5 with 20 x 9 and 4.5 in. Backspace