Skip to the beginning of the images gallery

Fitment

Years	Make	Model	Drive	Engine
2019-2023	Ford	Ranger	4WD	Diesel
2019-2023	Ford	Ranger	4WD	Gas

Features

FOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain
DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs
High clearance crossmembers improve strength and offroad capability
Heavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility
Top mounted strut spacers to provide lift and install easily
Differential skid plate for improved offroad protection
Rear lift blocks and u-bolts to lift and level the stance

Quick Specs

Front Lift Method : Coil-Over
Rear Lift Method : Block
Shocks Included : No
Front Lift Height : 3.5"
Rear Lift Height : 1.5"
Est. Install Time : 4 hrs
Difficulty Level : Moderate
Specialty Tools Needed : 35mm Axle Nut Socket, Air Hammer (Recommended), Ball Joint Separation Tool, Step Drill Bit, Cut-off Tool

Part Number : BDS1545FPE/1906FPE

Important Notes

Recommended Tires & Wheels (Trimming may be required)
285 / 65 with 18 x 9 and 5.75 in. Backspace
305 / 55 with 20 x 9 and 5 in. Backspace
Aftermarket wheels must have a minimum of 93.1mm center hub bore.
Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance.
Will NOT work on trucks equipped with cast steel steering knuckles
For 3" - Ford produces two knuckle/control arm configurations In 2019-2023 Model Rangers. Cast Steel Knuckle Equipped Models Have Different Ball Joints Than Models Equipped With Aluminum Knuckles. Be Sure To Verify Which Factory Knuckle Your Truck Has Before Ordering.
Does not work on Tremor models
ATTN State of California Consumers warning: Cancer and Reproductive Harm

BDS Suspension 3.5" lift kit w/FOX 2.5 Coil-Over

2019-2023 Ford Ranger 4WD Diesel/Gas

4.9256198347107 847 5

98.512396694215%

4.9/5 out of 847 Company Reviews. Rating:

Add Your Review

2019-2023 Ford Ranger 4WD Diesel/Gas

Brand : BDS Suspension
SKU :
Part Number :

As low as $3,901.75

Your discount may still be available. Contact us in Live Chat

Lowest Prices
Price match guarantee
In-House Experts
We know our products
Factory Authorized
Install Center
Guaranteed Fitment
Always the correct part
International Shipping?
Get a Quote

Talk to a Specialist Now

Click here for live chat

Product Details

Take your 2019-2023 Ford Ranger truck to the next level with a 3.5-inch lift kit with FOX 2.5 Coil-Over shocks from BDS. These kits feature proprietary FOX 2.5 coil-over shocks designed specifically to bolt-on performance for increase travel and the ability to soak up the roughest terrain along with smooth on-road comfort. This kit includes everything necessary to set your Ford Ranger up right with clearance for up to 33" tires.

To ensure proper drivetrain geometry the front differential is repositioned using relocation brackets. These brackets correct CV axle angle while allowing the use of the factory front skid plates. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel.

Up front, the lift kit includes steel top mount strut spacers, pre-load spacers, differential relocation brackets and tubular upper control arms. In the rear, this kit includes heavy duty lift shackles and custom-tuned matching FOX shocks.

DSC Adjustment

FOX 2.5 coil-overs are available standard with DSC (dual speed compression) adjustment to tune the high-speed and low-speed compression damping allowing for added control on-road with the ability to easily dial in more aggressive damping offroad. Tuning is a simple twist of the two clearly defined knobs with immediate feedback to dial it in for any terrain.

HD Upper Control Arms (UCAs)

Built for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.

Typically Ships In
Ships in 1-3 days i

Please note the ship times are estimates however we have seen a major improvement in overall supply chain issues in recent weeks.