BDS 88306059/88302059 Front Fox 2.5 Remote Reservoir Coil Overs w/ Optional DSC Adjuster fits 6" Lift (Pair)

BDS 88306059/88302059 Front Fox 2.5 Remote Reservoir Coil Overs w/ Optional DSC Adjuster fits 6
Fox and BDS Quality at LiftKits4Less Prices! - by ,2020-01-29 07:04:56
5/ 5stars
Man, I can't believe it was so easy getting these things shipped to my door. Too easy, in fact, as I now have to buy the rest of the BDS lift kit to replace my Fabtech kit; this is 100% on me and my stupidity for not doing more research. I just saw these, knew I had to have them, and found them at an unbeatable price here on LiftKits4Less. After a quick call to BDS and their awesome tech support I've decided to also buy the rest of the lift kit to complete the suspension build in the front and to get their replacement leaf springs and Fox 2.0 performance rear shocks.The ride quality of these things is already noticeable and I don't even have it set up correctly. Super easy to install if anyone is looking to upgrade their BDS 6" kits to these DSC Coilovers. 3 nuts on top, 2 bolts on the bottom, and lift the old one out through the upper control arm. Drop the new one in, re-fasten with all of the provided bolts and nuts, tighten up the hose clamps to secure the reservoir to the mounting bracket, and you're good to go! I was able to complete this install with a floor jack and one jack stand.The only downside to these, besides the fact that I have them installed on the wrong lift, is that in order to adjust the pre-load of the coil spring you have to do so off of the truck (as far as I know, as I have yet to complete this step). Both of my shocks in the pair arrived at the same measurement of pre-load so I haven't adjusted them but in my research found that you need a spring compressor and I don't know that there's room to try and do it all on the truck. Sure would be safer with it off, and like I said they're pretty easy to remove and re-install so I don't think this is going to be a big enough con to outweigh the pros of this setup. I'm planning to hit up AutoZone for their free tool rental to get this done if I have to adjust anything once I get the rest of the BDS kit in.Check out the video for further details on how LiftKits4Less was able to provide free, speedy shipping, at an unbeatable price!
"/>
1913.25In stock
  • |
  • SKU: BDS-88306059/88302059
  • |
  • Part Number: 88306059/88302059
Rating:
100% of 100

2007-2018 GM 1500 4WD w/o Magneride

Regular Price $2,013.95
Special Price $1,913.25
YOU SAVE 5%
- +
Your discount may still be available. Contact us in Live Chat
  • Lowest Prices
    Price match guarantee
  • In-House Experts
    We know our products
  • Factory Authorized
    Install Center
  • Guaranteed Fitment
    Always the correct part
  • Free Shipping
    In the continental US
  • International Shipping?
    Get a Quote
Have a Question?
702-267-6100
Talk to a Specialist Now

Product Details

BDS continues to uphold BDS' reputation of offering only high ends parts with these new coil-over shocks, a collaboration design by both BDS and Fox Racing. These shocks are built on the foundation of the Fox Factory Series 2.5" Remote Coil-over and have been designed to work with BDS lift systems.

Product Questions

Ask A Question

Fitment

YearsDriveMakeModel
2007-20184WDChevroletSilverado 1500
2007-20184WDGMCSierra 1500

Features

  • Smooth-bore, clear coated, zinc plated alloy body
  • Black anodized 6061-T6 billet aluminum mounting components
  • 7/8" hard chrome plated heat treated alloy steel shaft
  • High flow piston design with specially formulated race oil
  • External reservoir separates shock oil from high-pressure nitrogen
  • Easy bolt-on installation, no need to adjust coil spring preload
  • Provides added control and comfort for on-road use
  • More aggressive damping for use off-road
  • DSC adjuster allows for precise suspension tuning
  • No tools and no mess
  • DSC increases both low and high-speed compression levels up to 25%

Components

These coil-over kits come boxed as a pair with remote reservoir mounting brackets and all of the necessary hardware.

Important Notes

  • Used in BDS 6" Coil-Over Lift Kit 710F