Longer adjustable upper and lower control arms and a high clearance belly cross member with belly pan allows for more turning radius and obstacle clearance. Consists of front and rear ES9000 shocks, and other replacement components that will fit the new specifications of your Jeep. This complete suspension lift system improves handling and helps achieve the right height, clearance and attitude for your vehicle.
Pro Comp K3088BMX 4'' Long Arm Lift Kit w/Fox Shocks
- Brand: Pro Comp
- SKU: PC-K3088BMX
- Part Number: K3088F
1997-2006 Jeep Wrangler (TJ) 2WD/4WD Gas
Your discount may still be available. Contact us in Live Chat
Price match guarantee
We know our products
Always the correct part
In the continental US
Get a Quote
Have a Question?
Talk to a Specialist Now
- Fits: 97-06 Wrangler
- Shocks: Front/Rear ES9000
- Max Tire Size: 35x12.50R15-20, 35x12.50R15/ 315/75R16/315/70R17,305/70R18, 325/60R18, 295/60R20
- Wheel Size: 15" thru 20" up to 9" wide rims with 3.5" to 4.5" BS
- Front Lift: Coil Springs
- Rear Lift: Coil Springs
- Install Time: 10-12 Hours
|1||7450||Stainless Brake Lines|
|Plus||2||Rear 2.0 IFP Fox Shocks|
- Use of a 35"" x 12.50"" tires will require wider replacement fender flares or steel flat fenders.
- Driveline modifications may be required for height increases over 1.5"" due to increased driveline angles. Transfer case SYE (Slip Yoke Eliminator) kit and CV rear drive shaft required for Long Arm Applications. Rubicon models will require CV drive shaft w flange adapter (not avail from Pro Comp).
- All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc).
- Coil spacer 55496 can be used to increase front ride height by .75"".
- Vehicle will require alignment after kit is installed.
|Max Tire Size||35" x 12.50"|
|Wheel Diameter||15" +|
|Wheel Width||8" - 10"|
|Backspace||3.25" - 4.5"|
|Bolt Pattern||5 x 4.5"|
|Lug Nut Size||1/2"|
|Lug Nut Kit||PXA21183|