- Components:6" Lift Coil Springs (JK4 Front: # 1853602 & JK4 Rear: # 1854602)
0.5"" Lift Coil Spring Spacers (Front x 2: 1953100 & Rear x 2: # 1954105)
Alpine Long Control Arm & Bracket Kit - 8-Arm (3-6" Lift) (# 1315010)
HD Forged Adjustable Front Track Bar (0-6" Lift) (# 1753418)
HD Forged Adjustable Rear Track Bar (0-6" Lift) (# 1754418)
HD Drag Link Flip Kit w/ Front Track Bar Drop Bracket & Frame Brace Kit (# 1600450)
Front Track Bar Bracket Gusset (# 4951800)
Rear Track Bar Axle Bracket Kit (3-6" Lift) (# 1954777)
Speedbump & Progressive Bump Stop Kit - Front & Rear (# 1958250)
1.25" SpeedBump Bump Stop Pad Kit - Front Lower (# 1467125)
0.75" SpeedBump Bump Stop Strike Pad Kit - Rear Lower (x 3: # 1954600)
12.25" Front Sway Bar Quick Disconnect Kit (6" Lift) (# 1756000)
14.75" Rear Sway Bar Link Kit (6" Lift) (# 1754410)
26" Front Brake Line Kit - Stainless Steel Braided (# 4353310)
30" Rear Brake Line Kit - Stainless Steel Braided (# 4350310)
Front Brake Line Anchor Kit (# 1101255)
Exhaust Spacer Kit (# 2610000)
All necessary hardware
- Finish:Powdercoat
- Lift Height:6
- Part Number:1326000
- UPC:843885043324
- Weight:329.00
- Brand:Teraflex
- Features:HD Drag Link Flip Kit w/ Front Track Bar Drop Bracket & Frame Brace Kit corrects steering geometry, eliminates front end shimmy, and reinforces the frame
Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6" lift kits
Alpine Long Control Arms are constructed from durable 42mm x 4mm (upper) or 50mm x 5mm (lower) wall DOM tube for maximum strength
On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine Long Control Arms
Alpine Long Arm Brackets are gusseted and reinforced for superior strength w/ reduce NVH compared to other long arm kits
Delivers true Cross-Trail (CT) performance
Dependable performance w/ zero worries
Positive, responsive handling w/ reduced NVH
High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality.
HD Forged Adjustable Front and Rear (4"+) Track Bars and Rear Track Bar Bracket improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
Coil spring retainers prevent the springs from unseating during full suspension travel
Full range of movement for off-road flex and articulation
TeraFlex Limited Lifetime Warranty against defects
- California Proposition 65 Warning:No
Important Notes : Requires aftermarket wheels w/ 4.75" backspacing or less - or Offset Wheel Adapters (# 1055000) for stock wheels - NOT INCLUDED.
Requires driveshaft modifications such as our High-Angle Rzeppa CV Driveshafts or our High-Angle Rzeppa CV Joint Kit (# 1744014).
Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.
Requires cutting and welding.
Alignment required.
Requires longer shocks (NOT INCLUDED in base kit) - Falcon Performance Shocks recommended.
Install Time: 24 Hours
ATTN State of California Consumers warning: Cancer and Reproductive Harm www.p65warning.ca.gov