Designed specifically for Trail Boss and AT4 owners that want a little more ride height out of their truck for clearance of full size 33/1250R 18 inch or 20 inch tires, Fabtech lift kit is the ticket.
Fabtech's Upper Control Arm lift kit provides a 1.5'' increased ride height on Trail Boss and AT4 models without creating suspension bind at full droop. Fabtech vehicles have a factory 2'' lift. With the addition of Fabtech 1.5'' lift kit, the vehicle will sit as high as a standard model with a 3.5'' lift kit and clear a 33'' tall tire.
Lift is accomplished with an aluminum spacer at the top and a small preload spacer under the coil of the factory Coilover shock. Fabtech positions the Coilover properly to provide height without coil bind or over extending the travel that can lead to damaged suspension parts in the future.
The tubular Upper Control Arms with heavy duty ball joints address the geometry of the front suspension with the new ride height for proper alignablity. Due to the new GM suspension geometry of the 2019, there are no differential drop brackets required for the CV axles to operate properly.
Rear lift comes from 1'' blocks and u bolts. Some owners may opt to not install the rear blocks if they desire to level the stance of the vehicle.
The Stealth rear shocks are a monotube design that have a Nitrocarb piston rod for corrosion resistance and resist rock chipping. Fabtech provide a great highway ride with good offroad damping capacity.