BDS Suspension 560H 6" 4-Link Lift Kit

BDS Suspension 560H 6
2313.31In stock

2008-2010 Ford F-250/F-350 Super Duty 4WD Diesel/Gas

Regular Price $2,435.06
Special Price $2,313.31
- +
Your discount may still be available. Contact us in Live Chat
  • Lowest Prices
    Price match guarantee
  • In-House Experts
    We know our products
  • Factory Authorized
    Install Center
  • Guaranteed Fitment
    Always the correct part
  • Free Shipping
    In the continental US
  • International Shipping?
    Get a Quote
Have a Question?
Talk to a Specialist Now

Product Details

This kit includes two 6" Pro-Ride Coil Springs. This full replacement four link system is centered around 4 massive control arms featuring greasable ends. The 4-link system reduces caster change through wheel travel creating a more contolled feel both on and off road. The kit also comes with a new steering stabilizer, anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle and bump stop extension.

The rear is lifted via a 5" block kit or full replacment leaf spring options.Choose between gas and diesel configurations, as well as plenty of upgrades and acessories when customizing your kit.This kit features the Fox 2.0 IFP steel body shocks for the ultimate in comfort and performance.

Product Questions

Ask A Question


2008-20104WDFordF-250 Super Duty Diesel/Gas
2008-20104WDFordF-350 Super Duty Diesel/Gas


(1)01301005-up F250,350 4-link Box Kit 1 Of 2
(1)01351905-up F250/350 5in Rear W/o Ovld
(1)01361308 Superduty 6 In 4-link
(1)03361105-up Superduty 6 In Diesel Coils
(1)85415NX² Steering Stabilizer
(2)Fox 2.0 IFP Shocks
(2)Fox 2.0 IFP Shocks

Important Notes

Tire & Wheel Combinations

  • 37" x 13.50" w/17 x 9 and 4.5" back spacing
  • 37" x 13.50" w/18 x 9 and 4.5" back spacing
  • 37" x 13.50" w/20 x 9 and 4.5" back spacing

*Trimming may be required*

Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3

  • 1. Removal of the factory block is required.
  • 2. Installation of the rear block kit will result in a "pre-runner" look with the rear of the vehicle 2" lower than the front. To get a level stance you must upgrade to the rear leaf spring option.
  • 3. These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
  • 4. If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section.
  • 5. Although extremely rare, front driveline vibration may occur.
  • 6. Front exhaust modification may be required to clear the front driveshaft on gas models.
  • 7. U-bolts will not fit dually models.
  • 8. Dropped pitman arm will not fit 10 lug wide track F350 models.