BDS Suspension 274H 4" Lift Kit

BDS Suspension 274H 4
1476.83In stock

2005-2007 Dodge Ram 2500 Powerwagon 2WD/4WD Gas

Regular Price $1,554.56
Special Price $1,476.83
- +
Your discount may still be available. Contact us in Live Chat
  • Lowest Prices
    Price match guarantee
  • In-House Experts
    We know our products
  • Factory Authorized
    Install Center
  • Guaranteed Fitment
    Always the correct part
  • Free Shipping
    In the continental US
  • International Shipping?
    Get a Quote
Have a Question?
Talk to a Specialist Now

Product Details

This 4" lift kit includes front Pro-Ride Coil Springs and heavy duty, greasable upper and lower control arms. The lower arms are longer than stock to rotate the axle for proper alignment. A relocation bracket is used to flatten out the angle of the upper control arm to maintain your factory handling characteristics. All four control arms are greasable for long term performance.

A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket properly centers the axle under the vehicle. Extended bump stops, brake line relocation brackets and Powerwagon specific sway bar are also included.

The rear of the Dodge Ram is lifted via a 4" block kit or upgrade to Glide-Ride Leaf Springs to reduce axle wrap and create a more controlled and stable feel when towing.

Not only is the kit designed to last, but so is the finish. Every bracket is powder coated twice with a base grey color and then a clear coat over the top to ensure long term durability.

Product Questions

Ask A Question


2005-20074WDDodge/Ram2500 Powerwagon Gas


(1)012405Rear Block Kit 4" Axle
(1)01261103-up Dodge 3/4 Front 6 In Box Kit
(1)03260103-10 Dodge 3/4 ton 6in Coil Springs
(1)12240105-13 Power Wagon Sway Bar Links
(2)Fox 2.0 IFP Shocks
(2)Fox 2.0 IFP Shocks

Important Notes

Tire & Wheel Combinations

  • 36" x 12.50" w/17 x 9 and 5" back spacing

*Trimming may be required*

Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3

  • 1. These vehicle were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2" or 4" in diameter.
  • 2. May require exhaust modification to clear the front driveshaft at full droop.