BDS Suspension 1427H 4.5" Long Arm Lift Kit

BDS Suspension 1427H 4.5
2645.07In stock

1984-2001 Jeep Cherokee (XJ) 4WD Gas

Regular Price $2,784.28
Special Price $2,645.07
YOU SAVE 5%
- +
Your discount may still be available. Contact us in Live Chat
  • Lowest Prices
    Price match guarantee
  • In-House Experts
    We know our products
  • Factory Authorized
    Install Center
  • Guaranteed Fitment
    Always the correct part
  • Free Shipping
    In the continental US
  • International Shipping?
    Get a Quote
Have a Question?
702-267-6100
Talk to a Specialist Now

Product Details

The BDS 4.5" XJ Long Arm system provides the best on and offroad capability you could ask for. By maximizing the length of both the upper and lower control arms, BDS has minimized caster change for optimim handling and minimized road forces transmitted ultimately to your seat for the best ride. To give you some idea, the lower arms are nearly bottomed out at just over 32" and the uppers at just over 28". This is about double the length of the factory control arms!

Although this XJ long arm system makes for a great daily driver, the true abilities of this system won' t be appreciated until you hit the rocks, dirt and mud. The 4-Link design maintains better axle control through wheel travel than any radius arm system because the upper to lower link relationship is not fixed, yet is tuned for optimum performance based on link length and operating angles. The control arm geometry is setup with the massive belly pan that incorporates the link mounts and is built to smash rocks. Believe it or not, this system is completly bolt on with no welding to the unibody required!

BDS capable of withstanding full coil bind and a tuned rate lift the front. The rear is lifted with new Glide-Ride Leaf Spring and extended greasable shackles that really let the springs flex.

This system also incorpoartes BDS Ultimate sway bar disconnects for quick easy access to rediculous wheel travel and stainless steel brake lines to handle it. Bump stop extension are included to limit compression and keep the tires out of the fenders on the trail. A front adjustable track bar with flex joint fits into the existing frame mount, so drilling of the taper is not required and will allow you to accurately center the front axle.

This system is available with both flex and standard control arm bushings, NX² series or Fox 2.0 series shocks, and many other upgrades. To check it out all of the options BDS has for your XJ, customize your kit and see what our competition is up against.

If you truly want to do it right the first time, install the BDS 4.5" Long Arm system and have no regrets.

Product Questions

Ask A Question

Fitment

YearsDriveMakeModel
1984-20014WDJeepCherokee (XJ) Gas

Components

QtyPart#Description
(2)004209Jeep XJ 3" Rear Leaf Spring
(1)014445XJ 4.5in Long Arm Main Box Kit
(1)014654XJ 6.5" Crossmember Kit 1 Of 3
(1)014655XJ Long Arm Box Kit
(1)03445284-01 Jeep XJ 4.5" Front Coils Springs
(1)124451Ultimate Sway Bar Disconnects
(4)40121/2 x 3 x 6-3/4 Round U-bolt
(2)Fox 2.0 IFP Shocks
(2)Fox 2.0 IFP Shocks

Important Notes

Tire & Wheel Combinations

  • 32" x 11.50" w/15 x 8 and 3-1/2 to 4" back spacing

*Trimming may be required*

Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 4

  • 1. Measure the rear u-bolts before ordering. Some XJ's are equipped with a Dana 44 rear axle.
  • 2. CV style rear driveshaft (not included) and slip yoke eliminator kit is required.
  • 3. System only works with 4.0L motor and automatic transmission.
  • 4. '96 and earlier models may require a longer emergency brake cable.